USB DI PLUS Analog 이미지 확대 보기
  • USB DI PLUS Analog


ARX USB DI Plus는 ARX Systems의 2세대 USB DI이며 듀얼 모드 오디오 인터페이스가 있는 첫 번째 세대입니다. USB DI Plus와 USB DI Plus VC에는 PC에서 내부 사운드 카드 출력을 사용할 필요가 없는 24비트 고해상도 디지털-아날로그 변환기(DAC)가 내장되어 있습니다.

상품 웹기술서

The   USB DI Plus is ARX's 'Second Generation' USB DI, and the first with Dual Mode audio interface - Digital and Analog.  

In fact, it's "Two DI's in One! "  


In Digital USB Mode 

The USB DI Plus has an inbuilt 24 bit High Resolution digital to analog converter (DAC) which removes the need to use a Computer's existing internal sound card outputs, with their inherent noise and distortion.  

The USB DI Plus installs as a fully compatible generic "Plug and Play" USB audio device, requiring no special driver program installation.  

The USB DI Plus's DAC delivers Professional Line Level audio signals to Left and Right balanced XLR outputs.  

When switched to USB mode the USB DI Plus is powered via the USB cable, so no batteries or phantom power required to use it.  


In Analog Mode: 

Many Tablet Devices, Phones and iPads have no direct USB Digital Audio output, and interfacing their Audio with the professional world of balanced audio can be problematic.  

Switching the USB DI Plus to Analog mode effortlessly solves this problem by buffering the audio signal from the Headphone or Line output and producing a Professional Balanced Line Level audio signal on Left and Right balanced XLR outputs.  

To ensure reliability, Analog mode is passive with no batteries or phantom power required for use.  


Low Noise 

Both the USB DI Plus Digital and Analog operating modes feature full transformer balanced output isolation. This eliminates earth loops / ground hum and helps remove extraneous interaction noise and distortion ensuring noise free operation even in the harshest audio environments.  


Two Models 

The USB DI Plus is available in two models:  

USB DI Plus - Standard version, with no external gain / volume control, making it as Tamper Proof as possible. Straightforward Plug-and-Play makes it ideal for Production Companies. 

USB DI Plus VC - Still Plug-and-Play but with an external gain / volume control allowing users to vary the sound levels at a distance from the mixing console. 


Plug and Play 

The USB DI installs as a fully compatible generic USB audio device, requiring no special driver program installation on Mac OSX and Win XP or later  

The front panel has a Type B USB input connector, plus a Mini-Jack stereo Analog input, as well as two 6.5mm Left and Right analog jack inputs. A front panel switch will switch between the USB or Analog Inputs  

The rear has two transformer balanced analog audio XLR Line out connectors for connecting to any standard balanced analog input, with a Mono Outputs switch and an audio Ground lift switch  

A USB status LED on the front panel indicates that the USB DI Plus is connected and operating in USB mode.  

The USB DI Plus is housed in a heavy duty all-steel chassis finished in attractive matt textured polyurethane, with hardwearing epoxy screen printing and slip resistant rubber base pad.  

It is ideal for interfacing any USB equipped computer (especially notebook computers) with the balanced inputs of professional sound systems. Security features include an optional bracket kit for under-table mounting.  

The USB DI Plus includes a premium quality USB-A to USB-B cable, and is hand made in Australia 


USB DI Plus Specifications

Input Connector Digital - USB type B port

Input Connectors Analog - Stereo Mini-Jack input, standard Left and Right 6.5mm Jacks

Codec 24 bit High Resolution, 44.1 and 48 KHz

Output Impedance 300 Ohms Transformer Balanced

Output Level Maximum nominal output level 0dB

Output Noise
USB - System dependent
ISO transformer - Enviroment sensitive

Frequency Response 20 - 20 KHz ± 0.5 dB 

Power Operating current via USB Port 80mA in uSB mode

Output Connectors
2 x Male XLR, wired Pin 2 + Hot, Pin 3 – Cold. Pin 1 - switchable via Ground Lift switch on rear

All-steel chassis, fibreglass PCB, epoxy printing, slip-resistant rubber base pad

System Requirements for USB operation

  • Computer running Windows XP, 7/8/10 or Mac running OS X or later
  • USB port 

Precision engineered
With a couple of exceptions, all products in the Audibox range share a common footprint and manufacturing platform.
Offset lid screws enable close side-by-side mounting of multiple units.

Optimal storage temperature range 0'C - 40'C

Operating temperature range 0'C - 50'C

관련 상품



    이미지 확대보기USB DI PLUS Analog

    USB DI PLUS Analog
    • USB DI PLUS Analog

    비밀번호 인증

    글 작성시 설정한 비밀번호를 입력해 주세요.


    장바구니 담기

    상품이 장바구니에 담겼습니다.
    바로 확인하시겠습니까?

    찜 리스트 담기

    상품이 찜 리스트에 담겼습니다.
    바로 확인하시겠습니까?

    스크롤 좌측 배너
    스크롤 우측 배너
    상단으로 이동