SIMPLE AND COST EFFECTIVE MEDIA CONVERTER with WDM module
Repeat48 WDM-12
SIMPLE AND COST EFFECTIVE MEDIA CONVERTER with WDM module
Repeat48WDM-12 offers electrical to optical, optical to electrical or optical to optical conversion. It features 12 video channels combined over build-in CWDM module. All channels are transported to another location with single duplex fiber.
All BroaMan products comply with SMPTE standards, therefore can be used with 3rd party equipment.
Two Repeat48WDM can be used as a point to point pair with 2 fibers in between. It also connects with a Route66 device to offer additional I/O in remote location.
KEY FACTS:
12 x media converter
up to 6 x dual modules, each converts 3G-SDI to fiber or fiber to 3G-SDI
up to 6 x dual SFP modules
1 x duplex fiber AUX port to transport 3rd party protocol
All channels multiplexed into single duplex fiber cable – build-in CWDM module
Dual redundant PSU
1RU chassis
SPECIFICATIONS
Video ports
Standards SD, ED, HD, Dual Link, 3G, ASI, MADI
Complies with SMPTE 259M, 292M, 344M, 372M, 424M
Interface SDI – Serial Digital Interface
Optical Connection Complies with 21 CFR 1040.10 and 1040.11
Connection LC
Data rate Dependent on the Video data rate – no bandwidth restriction
Fiber cable lengths Standard singlemode transceiver ≤ 10 km
Special singlemode transceiver ≤ 80 km (on request)
Power Supply
Type Switch-mode, universal input
Mains voltage 100… 240 V 50 60 Hz
Frequency 50 60 Hz
Cooling Passive, via surface and ventilation openings on both sides of the device
Dimensions 1 RU / 19”
W x H x D 19.0 x 1.73 x 7.87 inch
Weight Dependent on configuration
SIMPLE AND COST EFFECTIVE MEDIA CONVERTER with WDM module
SIMPLE AND COST EFFECTIVE MEDIA CONVERTER with WDM module
Repeat48WDM-12 offers electrical to optical, optical to electrical or optical to optical conversion. It features 12 video channels combined over build-in CWDM module. All channels are transported to another location with single duplex fiber.
All BroaMan products comply with SMPTE standards, therefore can be used with 3rd party equipment.
Two Repeat48WDM can be used as a point to point pair with 2 fibers in between. It also connects with a Route66 device to offer additional I/O in remote location.
KEY FACTS:
12 x media converter
up to 6 x dual modules, each converts 3G-SDI to fiber or fiber to 3G-SDI
up to 6 x dual SFP modules
1 x duplex fiber AUX port to transport 3rd party protocol
All channels multiplexed into single duplex fiber cable – build-in CWDM module
Dual redundant PSU
1RU chassis
SPECIFICATIONS
Video ports
Standards SD, ED, HD, Dual Link, 3G, ASI, MADI
Complies with SMPTE 259M, 292M, 344M, 372M, 424M
Interface SDI – Serial Digital Interface
Optical Connection Complies with 21 CFR 1040.10 and 1040.11
Connection LC
Data rate Dependent on the Video data rate – no bandwidth restriction
Fiber cable lengths Standard singlemode transceiver ≤ 10 km
Special singlemode transceiver ≤ 80 km (on request)
Power Supply
Type Switch-mode, universal input
Mains voltage 100… 240 V 50 60 Hz
Frequency 50 60 Hz
Cooling Passive, via surface and ventilation openings on both sides of the device
Dimensions 1 RU / 19”
W x H x D 19.0 x 1.73 x 7.87 inch
Weight Dependent on configuration