ALL SIGNALS IN ONE DUPLEX FIBER CABLE
Mux22-IVT/FRAMESYNC8
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
Mux22-IVT/FRAMESYNC8 is a device, which combines different formats of video, data in a single duplex fiber cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.
Mux22-IVT/FRAMESYNC8 was created to distribute sync signals to multiple cameras. Its main features are:
Each Sync output can be individually selected to be Video Sync or Audio Word Clock Sync.
Phase shift and format of Video Sync is common to all 8 outputs with guaranteed no-mismatch in timing.
Short circuit of one Sync output does not affect any other port.
VSync and VSync8 are independent and can be indyvidually configured
VSync and VSync8 can have independent independent phase offsets.
The device is fully compatible with all Optocore products, which makes it very flexible. It is very easy to add analog or digital audio to the Mux22 by extending it with the Optocore devices. Still everything is transported via the same single duplex fiber cable.
Mux22 can be used as a point-to-point pair to transport multiple signals between two locations. Furthermore it can be used as a stagebox to Route66 Video Router – in that case it becomes a remote I/O device for the star-based larger system.
KEY FACTS:
8 x 3G-SDI reclocked video channels
Video available in different I/O combinations
8 x FRAMESYNC8 Outputs with common phase shift
Each sync output can be selected as BB/Tri-L or WC
2 x fiber SFP ports for redundant Optocore ring
2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
4 x RS485/422 or 4 x GPIO
2 x LAN
V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
V-Sync independently configured from FrameSync8 module
Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
Dual redundant PSU
No fan
1RU chassis
SPECIFICATIONS
Video ports
Standards SD, ED, HD, Dual Link, 3G, ASI, MADI
Complies with SMPTE 259M, 292M, 344M, 372M, 424M
Interface SDI – Serial Digital Interface
Optical Connection Complies with 21 CFR 1040.10 and 1040.11
Connection LC
Data rate Dependent on the Video data rate – no bandwidth restriction
Fiber cable lengths Standard singlemode transceiver ≤ 10 km
Special singlemode transceiver ≤ 80 km (on request)
SANE, LAN ports Convention
Audio TIA – 568A/B, Optocore 200 Mbit/s
LAN TIA – 568A/B, IEEE – 802.3 10/100 Mbit/s
Serial Data Port Convention EIA / TIA-485
Data channels Digital control data 4
Data rate Up to 10 Mbps
Impedance Termination 330 Ω
Source ≤ 10 Ω
Auxiliary Fiber Port 1310nm fiber tunnel
Connection Duplex LC
Data rate Dependent on the distance between locations – no bandwidth restriction
Sync Hardware standard 8x BNC – 75 Ω
Input Standards Word Clock, Black Burst (bi-level), Tri-Level
PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25
Output Standards Word Clock, Black Burst (bi-level), Tri-Level
BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25
Output Phase Shift Line, Frame, Pixel, Percent, Degree
FrameSync8 Hardware standard BNC – 75 Ω
Output Standards Word Clock, Black Burst (bi-level), Tri-Level
BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25
Output Phase Shift Line, Frame, Pixel, Percent, Degree
Remote Control
RS232 EIA / TIA – 232 57 600 Baud
USB USB 2.0 – Device 12 Mbit/s
LAN IEEE – 802.3 10/100 Mbit/s
Power Supply
Type Switch-mode, universal input
Mains voltage 100… 240 V 50 60 Hz
Frequency 50 60 Hz
Cooling Passive, via surface and ventilation openings on both sides of the device
Dimensions 1 RU / 19”
W x H x D 19.0 x 1.73 x 7.87 inch
Weight Dependent on configuration
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
Mux22-IVT/FRAMESYNC8 is a device, which combines different formats of video, data in a single duplex fiber cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.
Mux22-IVT/FRAMESYNC8 was created to distribute sync signals to multiple cameras. Its main features are:
Each Sync output can be individually selected to be Video Sync or Audio Word Clock Sync.
Phase shift and format of Video Sync is common to all 8 outputs with guaranteed no-mismatch in timing.
Short circuit of one Sync output does not affect any other port.
VSync and VSync8 are independent and can be indyvidually configured
VSync and VSync8 can have independent independent phase offsets.
The device is fully compatible with all Optocore products, which makes it very flexible. It is very easy to add analog or digital audio to the Mux22 by extending it with the Optocore devices. Still everything is transported via the same single duplex fiber cable.
Mux22 can be used as a point-to-point pair to transport multiple signals between two locations. Furthermore it can be used as a stagebox to Route66 Video Router – in that case it becomes a remote I/O device for the star-based larger system.
KEY FACTS:
8 x 3G-SDI reclocked video channels
Video available in different I/O combinations
8 x FRAMESYNC8 Outputs with common phase shift
Each sync output can be selected as BB/Tri-L or WC
2 x fiber SFP ports for redundant Optocore ring
2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
4 x RS485/422 or 4 x GPIO
2 x LAN
V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
V-Sync independently configured from FrameSync8 module
Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
Dual redundant PSU
No fan
1RU chassis
SPECIFICATIONS
Video ports
Standards SD, ED, HD, Dual Link, 3G, ASI, MADI
Complies with SMPTE 259M, 292M, 344M, 372M, 424M
Interface SDI – Serial Digital Interface
Optical Connection Complies with 21 CFR 1040.10 and 1040.11
Connection LC
Data rate Dependent on the Video data rate – no bandwidth restriction
Fiber cable lengths Standard singlemode transceiver ≤ 10 km
Special singlemode transceiver ≤ 80 km (on request)
SANE, LAN ports Convention
Audio TIA – 568A/B, Optocore 200 Mbit/s
LAN TIA – 568A/B, IEEE – 802.3 10/100 Mbit/s
Serial Data Port Convention EIA / TIA-485
Data channels Digital control data 4
Data rate Up to 10 Mbps
Impedance Termination 330 Ω
Source ≤ 10 Ω
Auxiliary Fiber Port 1310nm fiber tunnel
Connection Duplex LC
Data rate Dependent on the distance between locations – no bandwidth restriction
Sync Hardware standard 8x BNC – 75 Ω
Input Standards Word Clock, Black Burst (bi-level), Tri-Level
PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25
Output Standards Word Clock, Black Burst (bi-level), Tri-Level
BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25
Output Phase Shift Line, Frame, Pixel, Percent, Degree
FrameSync8 Hardware standard BNC – 75 Ω
Output Standards Word Clock, Black Burst (bi-level), Tri-Level
BNC 1Vpp, BNC 3Vpp, PAL/SECAM, NTSC, 720p59.94, 720p50, 1080i29.97, 1080i25
Output Phase Shift Line, Frame, Pixel, Percent, Degree
Remote Control
RS232 EIA / TIA – 232 57 600 Baud
USB USB 2.0 – Device 12 Mbit/s
LAN IEEE – 802.3 10/100 Mbit/s
Power Supply
Type Switch-mode, universal input
Mains voltage 100… 240 V 50 60 Hz
Frequency 50 60 Hz
Cooling Passive, via surface and ventilation openings on both sides of the device
Dimensions 1 RU / 19”
W x H x D 19.0 x 1.73 x 7.87 inch
Weight Dependent on configuration