ALL SIGNALS IN ONE DUPLEX FIBER CABLE
Mux22-IVT/IVT
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
Mux22-IVT/IVT is a device, which combines different formats of video and data in a single duplex fiber cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.
The device is fully compatible with all Optocore products, which makes it very flexible. It is very easy to add analog or digital audio to the Mux22 by extending it with the Optocore devices. Still everything is transported via the same single duplex fiber cable.
Mux22 can be used as a point-to-point pair to transport multiple signals between two locations. Furthermore it can be used as a stagebox to Route66 Video Router – in that case it becomes a remote I/O device for the star-based larger system.
KEY FACTS:
16 x 3G-SDI reclocked video channels
Video available in different I/O combinations
2 x fiber SFP ports for redundant Optocore ring
2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
4 x RS485/422 or 4 x GPIO
2 x LAN
V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
Dual redundant PSU
No fan
1RU chassis
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
ALL SIGNALS IN ONE DUPLEX FIBER CABLE
Mux22-IVT/IVT is a device, which combines different formats of video and data in a single duplex fiber cable. The number of video inputs and outputs can be specified when ordering, by selecting dual input or dual output modules. Every single channel and transceiver in the device can be controlled and monitored in real time remotely using Optocore Control application.
The device is fully compatible with all Optocore products, which makes it very flexible. It is very easy to add analog or digital audio to the Mux22 by extending it with the Optocore devices. Still everything is transported via the same single duplex fiber cable.
Mux22 can be used as a point-to-point pair to transport multiple signals between two locations. Furthermore it can be used as a stagebox to Route66 Video Router – in that case it becomes a remote I/O device for the star-based larger system.
KEY FACTS:
16 x 3G-SDI reclocked video channels
Video available in different I/O combinations
2 x fiber SFP ports for redundant Optocore ring
2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
4 x RS485/422 or 4 x GPIO
2 x LAN
V-Sync I/O – software selectable Tri-Level, Black Burst or WordClock sync
Auxiliary 1310nm tunnel for any-bandwidth 3rd party fiber protocol, i.e. MADI, 1G Ethernet, 10G Ethernet, SMPTE 311m
Dual redundant PSU
No fan
1RU chassis